Skills.
Give your AI a better way to work.
A skill is a set of written instructions that teaches an AI how to do one job the way it should be done: review a pull request, plan a migration, write the release notes.
Install one here and it travels with your account into Claude, Claude Code, Cursor and every other client you sign in with.
Category: AI & models
9,019 results · page 68 of 301
- View details
multiturn-sessionSkillAI & models
An evaluation and evolution tool for Agent Skills.
Ready to connect★ 892
- View details
skill-upperSkillAI & models
Create, run, diagnose, and iteratively improve Agent Skill evaluations (evals) with the skill-up CLI / 使用 skill-up CLI 创建、运行、诊断并持续改进 Agent Skill 评测. Use when the user asks to evaluate, test, regress, verify, fix, improve, iterate, or evolve a Skill; add or strengthen eval cases; write eval.yaml/case
Ready to connect★ 892
- View details
abaqus-amplitudeSkillAI & models
Define time-varying amplitudes. Use when user mentions ramp, time-varying, cyclic, pulse, or gradually increasing loads. Does NOT handle static constant loads.
Ready to connect★ 891
- View details
abaqus-bcSkillAI & models
Define boundary conditions - fixed supports, displacements, symmetry. Use when user mentions fixed, pinned, clamped, supported, or constrained. Does NOT handle loads or forces.
Ready to connect★ 891
- View details
abaqus-contact-analysisSkillAI & models
Analyze multi-body contact. Use when user mentions parts touching, friction between surfaces, bolt-plate contact, press fit, or assembly with contact.
Ready to connect★ 891
- View details
abaqus-coupled-analysisSkillAI & models
Complete workflow for coupled thermomechanical analysis. Use when user mentions thermal stress, thermal expansion, or temperature causing deformation.
Ready to connect★ 891
- View details
abaqus-dynamic-analysisSkillAI & models
Complete workflow for dynamic analysis. Use when user mentions impact, crash, drop test, transient, or time-varying response. Handles explicit and implicit dynamics.
Ready to connect★ 891
- View details
abaqus-fatigue-analysisSkillAI & models
Workflow for fatigue and durability analysis - cycle counting, damage accumulation, and fatigue life prediction.
Ready to connect★ 891
- View details
abaqus-fieldSkillAI & models
Define initial conditions and predefined fields. Use when user mentions initial temperature, pre-stress, residual stress, or import from previous analysis.
Ready to connect★ 891
- View details
abaqus-interactionSkillAI & models
Define contact and interactions - contact pairs, tie constraints, connectors. Use when user mentions contact, friction, tie, parts touching, or bonded surfaces.
Ready to connect★ 891
- View details
abaqus-loadSkillAI & models
Apply forces and pressures to structures. Use when user asks to apply a force, add pressure, put a load on, or mentions gravity, point loads, or distributed forces.
Ready to connect★ 891
- View details
abaqus-materialSkillAI & models
Define material properties for FEA models. Use when user mentions steel, aluminum, Young's modulus, elastic, plastic, density, or asks about material properties.
Ready to connect★ 891
- View details
abaqus-meshSkillAI & models
Generate finite element meshes. Use when user mentions mesh, elements, nodes, refine mesh, mesh size, or asks about element types like C3D8R, C3D10, S4R.
Ready to connect★ 891
- View details
abaqus-modal-analysisSkillAI & models
Complete workflow for modal/frequency analysis - extract natural frequencies and mode shapes. Use for vibration analysis and resonance avoidance.
Ready to connect★ 891
- View details
abaqus-shape-optimizationSkillAI & models
Optimize fillet/notch geometry. Use when user mentions stress concentration, fillet optimization, reshaping surfaces, or reducing peak stress. Moves surfaces only.
Ready to connect★ 891
- View details
abaqus-static-analysisSkillAI & models
Complete workflow for static structural analysis. Use when analyzing stress, displacement, or reaction forces under constant loads. For strength and stiffness evaluation.
Ready to connect★ 891
- View details
abaqus-stepSkillAI & models
Define analysis steps and procedures. Use when user mentions static analysis, dynamic step, frequency analysis, heat transfer step, or asks about analysis type, time increments, or nlgeom.
Ready to connect★ 891
- View details
abaqus-thermal-analysisSkillAI & models
Complete workflow for heat transfer analysis - steady-state and transient thermal. Use when user asks about temperature distribution, conduction, convection, or heat flow.
Ready to connect★ 891
- View details
abaqus-topology-optimizationSkillAI & models
Complete workflow for topology optimization using Tosca. Use to minimize weight while maintaining stiffness. Requires full Abaqus license (not Learning Edition).
Ready to connect★ 891
- View details
ansys-structural-workbenchSkillAI & models
Operate or inspect live ANSYS Workbench Mechanical structural simulations through the configured MCP, including model setup, materials, connections, loads, mesh, solve, convergence, validation, and reporting. Use whenever a user asks Codex to create, configure, inspect, mesh, solve, troubleshoot, or
Ready to connect★ 891
- View details
calculix-sizing-optimizationSkillAI & models
Workflow skill for two-stage sizing/parameter optimization on a CalculiX shell or beam deck via the optimize_structure tool — Latin Hypercube sweep plus coordinate descent to minimize mass subject to stress/displacement or natural-frequency constraints by tuning scalar section/material/load cards. U
Ready to connect★ 891
- View details
composite-curingSkillAI & models
Master skill for composite curing simulation with mold contact, friction, temperature, and Model Change springback in Abaqus. Routes to appropriate specialized skills.
Ready to connect★ 891
- View details
composite-curing-simulationSkillAI & models
Master skill for composite curing simulation with mold contact, friction, temperature, and Model Change springback in Abaqus. Invoke when user asks for curing simulation, springback analysis, composite layup with mold, or UMAT subroutine for composites. Routes to specialized sub-skills.
Ready to connect★ 891
- View details
composite-layupSkillAI & models
Define composite layup with ply angles, thickness, and count. Invoke when user asks to change ply angles, modify layup, or adjust ply count for curing simulation.
Ready to connect★ 891
- View details
composite-meshSkillAI & models
Generate through-thickness mesh for composite curing simulation. Invoke when user needs C3D8 solid elements, composite mesh, or through-thickness element layout.
Ready to connect★ 891
- View details
comsol-motor-nvh-evidenceSkillAI & models
Evidence-first COMSOL Java API and batch workflow for permanent-magnet motor NVH. Use when Codex must build, resume, solve, validate, or report a 2D motor model that couples rotating magnetic machinery, Maxwell-force harmonics, structural eigenmodes, pressure acoustics, acoustic-structure interactio
Ready to connect★ 891
- View details
curing-bcSkillAI & models
Define boundary conditions for composite curing simulation: mold contact constraints (TOOL U1=0, U2=0), springback Set-2 constraints, and Model Change demolding. Invoke when setting up BCs, constraints, or boundary conditions for curing models with mold.
Ready to connect★ 891
- View details
curing-contactSkillAI & models
Define contact pairs and friction for composite curing simulation: mold-composite contact (S1↔S4+S6), temperature-dependent friction (0.45→0.2→0.169), HARD contact property. Invoke when setting up contact, friction, or mold interaction in curing models.
Ready to connect★ 891
- View details
- View details
What is a skill?
A skill is plain text, usually a SKILL.md file and the scripts it refers to, written for an AI rather than for a person. It carries the steps, the house rules and the examples a good answer needs, so you stop pasting the same briefing into every new chat.
54,764 of the 55,196 skills listed here can be served through ahel today, and they come from public repositories. Each one has its own page with the instructions themselves on it, so you can read what a skill will tell your AI to do before you install it.
Install one and every AI you use gets it
Installing a skill adds it to your gateway and turns it on in the same step. Claude Code surfaces it as a slash command; any client can read the full instructions with the skill_read tool.
Nothing is copied into a project folder. The instructions are served from your account, so the same skill is there in every AI you connect, and turning it off removes it from all of them at once.